Brother PD-3000, Instruction Manual

Page: 55 / 210

CHAPTER 3 PROGRAMMING WITH ICONS
PD-3000 47
3. Select with , and then press
.
4. Input the resizing percentage for the X and the
Y-axes.
To magnify the pattern by 150%, input 150.
5. Input the stitch length, and then press .
To resize the pattern keeping the number of stitches
of the original data, input 0.0.
6. Move the needle to the reference point of
resizing with .
When resizing the pattern on the basis of the home
position, there is no need to move the needle.
7. Press .
The pattern is resized.
8. Press .
9. Carry out steps 3 to 5 of "Procedure for
modifying program".
Modifying a part of pattern
part of the programmed pattern is changed. The following describes how to modify 5, 6 and 7 to 5', 6' and 7'.
1. Carry out step 1 of "Procedure for modifying
program".
2. Select with , and then press
.
3. Press , and then press .
The work clamp moves from the start point by each
stitch.
4. When the needle point reaches 4, press .
The work clamp stops. When returning the needle
point, input the number of stitches to be returned and
press
.
5. Press .
6. Select with , and then press
.