Brother PD-3000, Instruction Manual

Page: 123 / 210

CHAPTER 4 PROGRAMMING WITH COMMANDS
PD-3000 115
Moving the escape point
The following describes how to move the escape point from A to B.
* The escape point is a provisional point provided for preventing the work clamp from interfering with the needle or the presser foot
when the work clamp is lifted at the start point.
1. Carry out step 1 of "Procedure for modifying
program" to call program.
2. Press , and then press .
The work clamp moves to the escape point.
3. Press .
4. Move the work clamp with .
Press when the needle point is at point B
of the pattern sheet.
B is programmed.
5. Press , and then press .
The needle point moves to A.
6. Press .
7. Input the number of stitches to be deleted, and
then press .
In the example, the first stitch is deleted. Press
.
8. The needle point moves to B.
9. Carry out steps 3 and 4 of "Procedure for
modifying program" to save program.