6. Replacing Parts
GT-3 Series
282
15.
Lean the Print Head backward to the inside of the Carriage (left), hold the Knob and pull up the Print
Head and remove it from the printer (right). Keep the surface of the Print Head (Nozzles) safe, do not
touch to other parts or the Print Head may be seriously damaged.
16.
Mount the new Print Head on the printer. Fit the V-shaped groove (4) to the Positioning Pin (5) (right).
17.
Hold the knob (6) of the Print Head (left) and push it downward so that the V-shaped groove can fit the
Positioning Pin (5). Push down the Print Head to fix the corner of the Print Head by the Flat Spring (7)
(right).
Nozzle
Surface
(4)
(5)
(5)
(7)
(6)
(5)
(7)
6
7
5
Slide the Print Head into the Flat
Spring from the right to the left.
