6. Replacing Parts
GT-3 Series
273
6-1-37. Ink Retrieval Unit (GT-381/GT-361 only)
<Note>
Keep the inside of the Tubes free from dust in operation.
Protect the Tube Joint by connecting the Cap in the photo below.
1. Replacing the Ink Return Valve Assy
Get the necessary number of SB3100001 (Tube D3XL200 Supply) (1) in replacement.
The number of Tubes connected to Ink Return Valve Assy is different between GT-381 and GT-361: four sets
for GT-381 (W1, W2, W3 and W4) and two sets for GT-361 (only W1 and W2).
Reuse the Cap VCP-3 (2) for GT-361.
1.
Turn ON the printer.
2.
Remove all the White Ink Cartridges and Insert the Filter Cartridges W for replacement.
3.
Select the menu [ Maintenance ] > [ Load White ] and press the OK Button.
4.
Use the Up/Down Button to select [ All Whites ] and then press the OK Button. Flushing starts.
Turn OFF the printer when finished.
・
Open the Front Cover UF to confirm if the ink inside the Tube is flushed.
・
If the ink remains, close the Front Cover UF and execute the steps (3) and (4) again.
5.
Turn OFF the printer.
VRSP6
GT-361
GT-381
Tube D3XL200
Supply
Ｗ
1
Ｗ
2
Ｗ
3
Ｗ
4
Ｗ
1
Ｗ
2
2
