6. Replacing Parts
16.
Remove the protection of the needle and insert the Tube.
<Note> Pay attention not to get the dust and threads into the inside of the needle.
17.
Apply some distilled water around the outside of Tube (C).
<Note>
・
Without distilled water, Tube may move round with Tube Clamp and it may kink.
・
Do not put distilled water INSIDE the tube, the ink may be damaged.
(C)
18.
Fix the Tube with the Tube Clamp D3 (19).
<Note> Insert the Tube and Tube Clamp D3 (19) until the edge of the Tube Clamp D will hit the nut 8 (20).
Until both edges can touch each other
(19)
(20)
(19)
GT-3 Series
261