3. Operation
3.
Start GT-3 Service Tool and select “Reset the warning Clean Tube W”, and then click [Next].
4.
Check the instructions shown in the dialog box and then click [Next].
5.
Select the printer in accordance with the explanation given in the dialog box and then click [Next].
<Note> It is only possible to select GT-3 printer(s) that are turned ON and are connected to a PC with a
USB cable. If two or more printers are connected to the PC, select the one for which operation is to be
performed.
6.
Click [Next] again to reset.
7.
Click [Next] again to return to the initial dialog.
<Note> Confirm that the "Clean Tube W*" message has disappeared from the right panel on the GT-3.
3-3-3. Demonstration Mode
By adding “Demo” to the beginning of the GT-3 Service Tool executable filename, the tool switches to “Off-line
Demonstration Mode” to allow the tool functions and specifications to be checked.
Normal file name
GT3ServiceTool.exe
File name in demonstration mode
DemoGT3ServiceTool.exe
3-4. Getting Log File and Analysis
3-4-1. Precautions of getting Log File
The way to get Log file from the GT-3 printer is to select [Log copy to USB] of the menu of the printer and write
the Log File to USB flash drive.
<Note>
It will take 5 to 10 minutes to write the Log data to the USB flash drive. The size of the Log File is approximately
7 Mb.
Execute GT-3 Service Tool on PC to view the Log file.
<Important>
Log files contain information such as the amount of ink used, the number of prints, and panel
operation records. Before acquiring logs from the customer’s GT-3, explain to customers and make
sure they understand that “log files are used only to analyze trouble and gain an understanding of the
operating status, and are not to be used for purposes other than these”.
86
GT-3 Series
