6. Replacing Parts
4.
Turn ON the Printer.
5.
Push the Platen Button on the Operation Panel to confirm that the Platen should stop at the front-most
position in unloading and stop at the back-most position in loading.
6.
Confirm the top/bottom of the print position on the Platen by printing the Grid data. (Refer to “6-1-9.
Adjustment of the Platen Sensor Dog”.)
7.
Mount the Cover PF and the Cover DL. (Refer to “6-1-2. Assembling/Disassembling of the Covers”.)
6-1-9. Adjustment of the Platen Sensor Dog
Adjust the print position with the Platen Sensor Dog.
Confirmation the vertical margins
1.
Cover the Platen with paper, e.g. four sheets of A4 Paper as shown below.
The edges should be aligned with the Platen.
Print the Grid14x16.ar3 data in the [ Useful tools ] of [Brother GT-3 Tools ] in your PC. (Refer to the
“3-3-7. Opening the Useful Tools” in the Instruction Manual”.)
(1)
GT-3 Series
144
