6. Replacing Parts
21.
Remove the Tube from the Tube Holder Fix (15).
(15)
22.
Loosen the Tube Clamp D3 (21) and remove the Tube.
<Note> Pay attention to the ink flowing out from the Tube in disconnecting; it may give damage to your
hands, the printer and the table.
(21)
23.
Cover the needle with the protection (cut tube) to protect from the dust and threads.
Tube Joint 2:*VRFP6
Protection (cut tube)
24.
Remove the old Tube from the printer.
<Note> Pay attention not to pull out the other Tubes; do not give damage to the other Tubes in operation.
GT-3 Series
239
