Brocade Communications Systems VDX 6940 Series, Hardware Installation Manual, Page: 46 / 136

1 Rear brackets
2 Screws, 6-32 x 1/4-in., panhead Phillips
FIGURE 22 Attaching the rear brackets to the extensions
Attaching the rear brackets to the rack posts
Complete the following steps to attach the rear brackets to the rack posts.
1. Attach the right rear bracket to the right rear rack post using two 10-32 x 5/8-in. panhead screws
and two retainer nuts, as shown in Figure 23 . Use the upper and lower holes in the bracket.
2. Attach the left rear bracket to the left rear rack post using two 10-32 x 5/8-in. panhead screws and
two retainer nuts. Use the upper and lower holes in the bracket.
3. Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lb (29 cm-kg).
Attaching the rear brackets to the rack posts
46 Brocade VDX 6940 Hardware Installation Guide
53-1003495-02