Broadconnect 9600 Series User Manual Download Page 94 | Manualshive

Page: 94 / 162

background image

9600 Series User Guide

Page 94

Issue 05d (Wednesday, March 07, 2012)

IP Office

15. Groups

Your system administrator can include you as a member of a group along with other users. Each group has its own
extension number which can be used as the destination for a call.

When a call is made to a group, it is presented to the available group members, either one at a time or all at the same
time, until answered by one of the members.

How long a group call will ring at each group member before being presented to the next member is controlled by the
group's own settings. Hunt groups also use voicemail and have their own settings for when an unanswered call should go
to the group's mailbox. For group calls, the hunt group's voicemail settings are used rather than your settings.

The system administrator can enable a number of hunt group menu options on your phone. Each option is enabled for a
selected hunt group or hunt groups of which you are a member:

·

Enable/Disable Your Group Membership

When your membership of a hunt group is disabled, you no longer receive hunt group calls for that group. You are
still a member of the group and can re-enable your membership.

·

Change the Hunt Group Service Status

Each hunt group can either be in service, in night service, or out of service. When in night service or out of
service, the groups calls are redirected to an alternate group, or to voicemail if available.

·

Change the Hunt Group Fallback Destination

These menus allow you to change the alternate groups used for the group's calls when it is in night service or out
of service status.

Default Short Codes

Short codes are numbers that you can dial to enable and disable various features. Your system administrator will confirm
any additional short codes that may have been configured for your use.

·

Night Service Status On: *20*N#
Set a hunt group into night service status by entering its extension number (N).

·

Night Service Status Off: *21*N#
Take a hunt group out of night service status by entering its extension number (N).

95

96

96

«
...
92
93
94
95
96
...
»

Summary of Contents for 9600 Series



































































































































































Reviews:

No comments

Related manuals for 9600 Series

Brand: Samsung Pages: 22

Brand: Collage Investments Pages: 34

Brand: AGM Pages: 11

Brand: Ratel Pages: 2

Brand: Hyundai Pages: 24

Brand: Yealink Pages: 8

Brand: Majestic Pages: 37

Brand: Blaupunkt Pages: 38

Brand: Micromax Pages: 18

Brand: Kosher Pages: 19

Brand: NTT docomo Pages: 211

Brand: AOC Pages: 22

Brand: DDM Pages: 24

Brand: XONTEL Pages: 13

Brand: Splicecom Pages: 70

Mediamaster 210

Brand: Nokia Pages: 40

Brand: Nokia Pages: 44

Brand: Nokia Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands