Broadconnect 9600 Series User Manual Download Page 115

Page: 115 / 162

9600 Series User Guide

Page 115

Issue 05d (Wednesday, March 07, 2012)

IP Office

Phone Settings: Ringer Controls

18.5.5 Ringer Volume

You can adjust the ringer volume while the phone is idle or while it is ringing. The status indication line displays a

icon

followed by eight bubbles that represent the volume level. When no ringer is audible, the indication line displays a
icon.

1. With the phone idle or ringing, press the

key.

2. Use the

plus and

–

minus keys to adjust the volume.

3. The display returns to normal after a few seconds.

18.5.6 Internal Auto Answer

You can select to have internal calls automatically connected if you are not already on a call. The call will be connected,
after the phone gives a brief tone, using either the phone's speaker or the headset as set by the phone's

audio path

setting

1. Press Features.

2. Use the

up and down

arrow keys to highlight Options & Settings. Press Select.

3. Use the

up and down

arrow keys to highlight Call Settings. Press Select.

4. Use the

up and down

arrow keys to highlight Internal Auto-Answer.

5. Press the Change soft key to change the setting.

This function can be assigned to a

feature button

configured with the Internal Auto Answer action. The button lamp

will indicate when 'internal auto answer' is on.

122

100

Summary of Contents for 9600 Series



































































































































































Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands

Broadconnect 9600 Series, User Manual

Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands