Broadconnect 9600 Series User Manual Download Page 30

Page: 30 / 162

9600 Series User Guide

Page 30

Issue 05d (Wednesday, March 07, 2012)

IP Office

3. Answering Calls

A slow flashing red lamp on an appearance button indicates an alerting call. This may also be accompanied by

ringing

and by the

message lamp flashing

Selected Button

If you are currently not on a call, you can answer the alerting call in the following ways:

1. Select the method which you want to use to talk to the caller:

To quiet the ringing, press the Ignore soft key. The call will still continue alerting visually and can be
answered or ignored.

To redirect the call to voicemail, press the To VM soft key.

To answer the call using the handset, lift the handset.

To answer the call handsfree, press the SPEAKER key.

To answer the call on a headset, press the

HEADSET key.

Just pressing the call appearance key will answer the call either on the speaker or headset depending on the
phone's

audio path

setting.

2. Once you have answered the call, you can switch between different talk modes:

To switch to using the handset, lift the handset.

To switch to handsfree, press the SPEAKER key. If you were using the handset you can now safely replace
it.

To switch to headset mode, press the

HEADSET key. If you were using the handset you can now safely

replace it.

If you have answered the call on the speaker or headset, pressing the SPEAKER or HEADSET key again
before you select another mode will end the call.

Just pressing the call appearance key or any other appearance button will put the current call on hold.

Answering Another Call

If you are already on a call, answering a new call will automatically put the existing call on hold

[1]

, unless your first press

Drop.

1. Using the

up and down

arrow keys, scroll the display highlight the waiting call.

To quiet the ringing, press the Ignore soft key. The call will still continue alerting and can be answered or
ignored.

To redirect the call to voicemail, press the To VM soft key.

2. To answer the call, press the call appearance button. Your existing call will be put on hold.

112

113

Summary of Contents for 9600 Series



































































































































































Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands

Broadconnect 9600 Series, User Manual

Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands