Broadconnect 9600 Series User Manual Download Page 73

Page: 73 / 162

9600 Series User Guide

Page 73

Issue 05d (Wednesday, March 07, 2012)

IP Office

Voicemail: Changing Your Voicemail Code

12.8 Switching Voicemail On/Off

You can control whether the telephone system uses voicemail to answer your unanswered calls. This does not switch off
your mailbox which you can still access to play existing messages and use other functions.

1. Press the

MESSAGES button.

Depending on how your system is configured, you may be required to enter your voicemail password and then
press the Done soft key.

2. The Visual Voice menu is displayed.

3. Use the

up and down

arrow keys to highlight Voicemail.

4. Press the Change to switch between On or Off.

5. Press Save to save the change.

12.9 Transferring to Voicemail

When set to visual voice mode, the

key can be used to transfer your current call to the voicemail mailbox of another

user or group.

1. With the call connected, press the

key. You are still connected to the call and can continue talking.

2. Dial the extension number of the user or group to which you want to transfer the call.

3. When the number matches a user or group, their name is displayed.

To transfer the call to the user or group's mailbox, press Select. The caller will hear a few seconds of ringing
and then the mailbox greeting.

To exit the transfer menu, press Cancel.

12.10 Sending a Call to Voicemail

You can transfer a call targeted at you directly to your voicemail mailbox.

1. If the call is not the currently highlighted call on the display, use the

up and down

arrow keys to highlight it.

2. Press the To VM soft key. The call is redirected to your mailbox.

Summary of Contents for 9600 Series



































































































































































Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands

Broadconnect 9600 Series, User Manual

Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands