Broadconnect 9600 Series User Manual Download Page 71 | Manualshive

Page: 71 / 162

background image

9600 Series User Guide

Page 71

Issue 05d (Wednesday, March 07, 2012)

IP Office

Voicemail: Mailbox Greeting

12.6 Mailbox Greeting

While the voicemail system will play a generic greeting to a caller, prompting them to leave a message, you can record
your own greeting.

1. Press the

MESSAGES button.

·

Depending on how your system is configured, you may be required to enter your voicemail password and then
press the Done soft key.

2. The Visual Voice menu is displayed.

3. Use the

up and down

arrow keys to scroll to the Greeting option and press Select.

4. Use the soft keys to listen to and record your mailbox greeting.

·

Record
Record a new greeting. Note that the greeting must be at least three seconds long or the voicemail system
will discard it.

·

Listen
Listen to the current greeting or the new greeting just recorded.

·

Submit
Submit the new recording as your mailbox greeting.

·

More
Switch between the different sets of available soft key functions.

·

Delete
Delete your current mailbox greeting. The greeting will return to its default mailbox greeting.

·

Cancel
Return to the main Visual Voice menu.

Personal Greetings

Intuity voicemail allows a number of greetings to be recorded and then used for different call types (internal, external,
etc). These greetings are set up and recorded through the mailbox voice prompt interface.They can also be set up and
recorded using the one-X Portal for IP Office application.

«
...
69
70
71
72
73
...
»

Summary of Contents for 9600 Series



































































































































































Reviews:

No comments

Related manuals for 9600 Series

Brand: M4 Pages: 19

Brand: LOGICOM Pages: 13

Brand: ZTC Pages: 169

Brand: BenQ Pages: 97

Sprint Torcque XT

Brand: Kyocera Pages: 209

PhoneEasy 337ip

Brand: Doro Pages: 144

Brand: Hyundai Pages: 25

Brand: Amplicomms Pages: 90

BLACKVIEW BV6000

Brand: Iget Pages: 52

Brand: Grandstream Networks Pages: 42

Brand: Alcatel-Lucent Pages: 60

Brand: IPRO Pages: 66

Brand: Geemarc Pages: 69

Brand: Geemarc Pages: 81

Clearsound CL8400

Brand: Geemarc Pages: 102

Brand: Zte Pages: 96

Brand: XONTEL Pages: 13

Brand: Nokia Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands