Broadconnect 9600 Series User Manual Download Page 117

Page: 117 / 162

9600 Series User Guide

Page 117

Issue 05d (Wednesday, March 07, 2012)

IP Office

Phone Settings: Display Controls

18.6.1 Display Brightness

1. Press the

MENU/HOME button and select Settings.

2. Use the

up and down

arrow keys to highlight Options & Settings. Press Select.

3. Use the

up and down

arrow keys to highlight Screen & Sound Options. Press Select.

4. Use the

up and down

arrow keys to highlight Brightness. Press Select.

5. Use the left and right arrow keys to adjust the brightness as required.

6. When completed, press the Save soft key.

7. Press Back / Exit to exit the menus.

18.6.1.1 Display Contrast

1. Press the

MENU/HOME button and select Settings.

2. Use the

up and down

arrow keys to highlight Options & Settings. Press Select.

3. Use the

up and down

arrow keys to highlight Screen & Sound Options. Press Select.

4. Use the

up and down

arrow keys to highlight Contrast. Press Select.

5. Use the left and right arrow keys to adjust the brightness as required.

6. When completed, press the Done soft key.

7. Press Back / Exit to exit the menus.

18.6.2 Last Call Duration Display

As an alternate to

call timer

display, you can have the phone briefly (4 seconds) display the duration of the call after

it is ended.

1. Press the Features soft key if shown. To do this during a call, press the

PHONE key and then press the

Features soft key.

2. Use the

up and down

arrow keys to highlight Call Settings. Press Select.

3. Use the

up and down

arrow keys to highlight Show Last Call Duration.

4. Press Change to change the setting between On or Off.

5. Press the Save soft key.

118

Summary of Contents for 9600 Series



































































































































































Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands

Broadconnect 9600 Series, User Manual

Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands