Broadconnect 9600 Series User Manual Download

Page: 88 / 162

9600 Series User Guide

Page 88

Issue 05d (Wednesday, March 07, 2012)

IP Office

14.2.3 Forward On Busy/No Answer (Features Menu)

You may be able to use the Features menu to switch 'forward on no answer' and 'forward on busy' on or off.

1. Press the Features soft key if shown. To do this during a call, press the

PHONE key and then press the

Features soft key.

2. Use the

up and down

arrow keys to highlight Forward. Press Select.

3. Use the

up and down

arrow keys to highlight Fwd Busy/No Answer. Press Select.

Use the

up and down

arrow keys to scroll through the menu options.

To switch 'forward on busy' on or off, highlight Fwd Busy and press On or Off.

To switch 'forward on no answer' on or off, highlight Fwd No Answer and press On or Off.

To select which calls are forwarded highlight Call Type. Press Change to change the option between
All Calls or External Calls Only.

To change the destination highlight Destination and press Edit. Enter the number and press Select.

Press Save to save any changes.

The system administrator is able to configure whether you can access the Forward and Follow Me menu and

status options.

14.2.4 Forward On No Answer (Status Menu)

If your phone is set to '

forward on no answer

' you can clear or change the forward settings through the Status

menu.

1. Press the Status soft key if shown.

To access the Status menu during a call, press the

PHONE key and then press the Status soft key if

shown.

2. Use the

up and down

arrow keys to highlight Fwd No Answer.

3. To switch the forward off press Off.

4. To change the forward setting press Details.

Use the

up and down

arrow keys to scroll through the menu options.

To switch 'forward on busy' on or off, highlight Fwd Busy and press On or Off.

To switch 'forward on no answer' on or off, highlight Fwd No Answer and press On or Off.

To select which calls are forwarded highlight Call Type. Press Change to change the option between
All Calls or External Calls Only.

To change the destination highlight Destination and press Edit. Enter the number and press Select.

Press Save to save any changes.

The system administrator is able to configure whether you can access the Forward and Follow Me menu and

status options.

153

Summary of Contents for 9600 Series



































































































































































Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands

Broadconnect 9600 Series, User Manual

Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands