Broadconnect 9600 Series User Manual Download

Page: 28 / 162

9600 Series User Guide

Page 28

Issue 05d (Wednesday, March 07, 2012)

IP Office

2.8 Adjusting the Call Volume

While talking, you can adjust the volume of the incoming call. The volume is adjusted separately for whichever device is
in use (

handset

headset

speaker

1. With the call connected, press the

VOLUME key.

2. Use the + plus and – minus keys to adjust the volume.

3. The display will return to normal after a few seconds.

2.9 Muting a Call

Muting a call stops the caller from hearing you. However you can still hear them. The status indication line indicates a

mute setting via the

icon.

The mute setting remains active even if you switch between calls using hold and or appearance buttons.

If you change how you are listening to the call, for example switching from the handset to the speaker, the mute
setting is canceled.

1. To activate mute, press the MUTE key. The button will be lit while mute is active.

2. To switch mute off, press the MUTE key again.

2.10 Ending Calls

The Drop option can be used to end the currently highlighted call on the display.

If the call is connected on the phone's speaker, the SPEAKER key is lit. Pressing the key again will end the call.

If the call is connected on the phone's headset, the

HEADSET key is lit. Pressing the key again will end the

call.

If the call is connected on the phone's handset, replacing the handset will end the call.

122

Summary of Contents for 9600 Series



































































































































































Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands

Broadconnect 9600 Series, User Manual

Search results

Summary of Contents for 9600 Series

Reviews:

Related manuals for 9600 Series

Brands by name

Popular brands