Conettix Universal Dual Path Communicator
Communication Configuration | en
71
Bosch Security Systems, Inc.
Installation and Operation Manual
2017.11 | 05 | F.01U.311.207
When the cellular plug-in module hears no towers for the minutes set by this parameter the
B465 creates a No
Towers
event and a No
IP
Address event.
The B465 creates a No
Tower
restoral event when the cellular plug-in module hears one or
more towers for the minutes set by this parameter.
The B465 creates a No
IP
Address
restoral
event when the cellular plug-in module registers
with one or more towers and receives an IP address within 1 minute.
Notice!
When one or more towers are available, 1 minute delay for No
IP
Address
event
If the cellular plug-in module successfully registers with one or more towers, but does not
receive an IP address within 1 minute, the B465 creates a No
IP
Address
event.
USB Menu Location
[3] Advanced Communication Configuration > [4] Cellular Setup > [4] Reporting Delay for No
Towers (min.)
7.11.8
IPv4 DNS Server IP Address
Default
: 0.0.0.0
Selections
: 0.0.0.0 to 255.255.255.255
A Domain Name Server (DNS) converts internet domain names or hostnames to their
corresponding IP addresses. In DHCP mode, the DHCP server’s default DNS is used. To use a
custom DNS server in DHCP mode, enter the custom DNS server’s IP address here.
Further information
IP Address and Domain Name formats
USB Menu Location
[3] Advanced Communication Configuration > [4] Cellular Setup > [5] IPv4 DNS Server IP
Address
7.11.9
Alternate IPv4 DNS Server IP Address
Default
: 0.0.0.0
Selections
: 0.0.0.0 to 255.255.255.255
If the B465 fails to obtain an address from the primary server, it tries the alternate DNS server.
Enter the IP address for the alternate IPv4 DNS server.
Further information
IP Address and Domain Name formats
USB Menu Location
[3] Advanced Communication Configuration > [4] Cellular Setup > [6] Alternate IPv4 DNS
Server IP Address
7.11.10
IPv4 Test Address
Default
: 8.8.8.8
Selections
:
IPv4 address or Domain Name
The B465 pings the IPv4 Test Address to verify the integrity of the network and the network
configuration settings.
The default test address works for most networks.
Further information
IP Address and Domain Name formats
USB Menu Location
[3] Advanced Communication Configuration > [4] Cellular Setup > [5] IPv4 DNS Server IP
Address
Summary of Contents for B465
Page 1: ...Conettix Universal Dual Path Communicator B465 en Installation and Operation Manual ...
Page 2: ......
Page 114: ......