Bosch B465, Installation And Operation Manual

Page: 58 / 115

58 en | Communication Configuration Conettix Universal Dual Path Communicator
2017.11 | 05 | F.01U.311.207 Installation and Operation Manual Bosch Security Systems, Inc.
7 Communication Configuration
Use the parameters in this section to configure the B465 for communication to a central
station receiver over an IP network.
7.1 Account Number / NNC Number
Default : [blank]
Selections : 0-9, A-F (up to 10 digits)
Enter a 1 to 10 digit account number.
The B465 uses the account number to make an 8 digit NNC Number for sending reports to the
central station receiver. If you enter less than 8 digits the B465 adds zeroes to make the NNC
number. For example if you enter 123 for the account number , the NNC number is 00000123.
If you enter a 9 or 10 digit account number the B465 uses only 8 digits. For example, if you
enter 1234567890 for the account number, the NNC number is 34567890.
USB Menu Location
[2] Standard Communication Configuration > [1] Account Number / NCC Number
7.2 Substitute Account Number
Default : Disabled
Selections :
– Enabled - Before the B465 sends the reports from the control panel to the central station
receiver, it substitutes (replaces) the account number in the report with the Alternate
Account Number.
– Disabled - the B465 does not replace the account number in reports.
USB Menu Location
[3] Advanced Communication Configuration > [1] Account Setup > [5} Substitute Account
Number
7.3 Alternate Account Number
Default : [blank]
Selections : 0-9, A-F (up to 10 digits)
When the Substitute Account Number parameter is set to Enabled, the B465 replaces the
account number in the report from the control panel with the Alternate Account Number.
Enter a 1 to 10 digit account number.
When the B465 replaces the account number, it modifies the Alternate Account Number to
meet the requirements of the reporting format of the report from the panel. Refer to the table
below.
Reporting format
(report from panel) Account number
minimum length (digits) Account number
maximum length (digits)
Modem IIe / IIIa 2 4 10
Modem II 4 4
Contact ID 4 10
Pulse 1400/2300 (3x1, 3x1e) 3 3
Pulse 1400/2300 (4x2) 4 4
SIA DC-03 2 6
Tab. 7.3: Reporting format / Account number length