50
en | Configuration and Diagnostics
Conettix Universal Dual Path Communicator
2017.11 | 05 | F.01U.311.207
Installation and Operation Manual
Bosch Security Systems, Inc.
–
Primary power low or missing
–
Battery missing
–
Battery low voltage
–
Battery failed to charge
–
Battery charger failed
–
B44x plug-in missing
–
B44x plug-in invalid
–
No cellular IP address
–
Signal strength low
–
No towers
–
B44x not active
–
B44x failure
–
Configuration failure
–
Invalid configuration
–
Firmware checksum error
–
Configuration checksum error
–
SIM missing
–
SIM PIN wrong
–
SIM PIN not needed
–
SIM PIN lockout
–
Invalid access point
–
No Ethernet IP address
–
Tampered
–
Ethernet DNS lookup error, primary receiver
–
Cellular DNS lookup error, primary receiver
–
Ethernet DNS lookup error, secondary receiver
–
Cellular DNS lookup error, secondary receiver
–
Ethernet DNS lookup error, IPv4 test address
–
Ethernet DNS lookup error, IPv6 test address
–
Cellular DNS lookup error, IPv4 test address
–
Cellular DNS lookup error, IPv6 test address
–
Supervision of primary receiver over Ethernet failed
–
Supervision of primary receiver over cellular failed
–
Supervision of secondary receiver over Ethernet failed
–
Supervision of secondary receiver over cellular failed
–
Communication failure
–
Phone line 1 shorted
–
Phone line 2 shorted
–
Phone line 1 no data received
–
Phone line 2 no data received
–
Phone line 1 received data error
–
Phone line 2 received data error
Advanced Status
You must enter the Status menu in order to get to Advanced Status.
Accessing the Advanced Status Menu parameters:
1.
Enter the passcode to launch the USB menu.
2.
Enter
[2] Advanced Status
. The Advanced Status option appears.
The following section describes the description of the Advanced Status menu information.
Summary of Contents for B465
Page 1: ...Conettix Universal Dual Path Communicator B465 en Installation and Operation Manual ...
Page 2: ......
Page 114: ......