83
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: QUALITY OF SERVICE
Scheduler Mode: Controls how many of the queues are scheduled as strict and how many are scheduled as weighted on this switch
port.
Queue Shaper Enable: Controls whether the queue shaper is enabled for this queue on this switch port.
Queue Shaper Rate: Controls the rate for the queue shaper. This value is restricted to 100-13107100 when “Unit” is kbps, and 1-13107
when “Unit” is Mbps. The rate is internally rounded up to the nearest value supported by the queue shaper.
Queue Shaper Unit: Controls the unit of measure for the queue shaper rate as kbps or Mbps.
Queue Shaper Rate-type: The rate type of the queue shaper. The allowed values are:
– Line: Specify that this shaper operates on line rate.
– Data: Specify that this shaper operates on data rate.
Queue Scheduler Weight: Controls the weight for this queue. This value is restricted to 1-100. This parameter is only shown if
“Scheduler Mode” is set to “Weighted.”
Queue Scheduler Percent: Shows the weight in percent for this queue. This parameter is only shown if “Scheduler Mode” is set to
“Weighted.”
Port Shaper Enable: Controls whether the port shaper is enabled for this switch port.
Port Shaper Rate: Controls the rate for the port shaper. This value is restricted to 100-13107100 when “Unit” is kbps, and 1-13107 when
“Unit” is Mbps. The rate is internally rounded up to the nearest value supported by the port shaper.
Port Shaper Unit: Controls the unit of measure for the port shaper rate as kbps or Mbps.
Port Shaper Rate-type: The rate type of the port shaper. The allowed values are:
– Line: Specify that this shaper operates on line rate.
– Data: Specify that this shaper operates on data rate.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
