94
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: QUALITY OF SERVICE
5.8.2 STATUS
This section will explain how to configure and show the QCL status by different QCL users. Each row describes the QCE that is
defined. It is a conflict if a specific QCE is not applied to the hardware due to hardware limitations. The maximum number of QCEs is
256 on each switch.
WEB INTERFACE
To display the QoS Control List Status in the web interface:
1. Click Quality of Service, QoS Contol List and Status.
2. To auto-refresh the information, select “Auto-refresh.”
3. Scroll to select the combined, static, Voice VLAN and conflict.
4. Click “Refresh” to refresh an entry of the MVR Statistics Information.
FIGURE 5-15. QOS CONTROL LIST STATUS
Parameter description:
User: Indicates the QCL user.
QCE: Indicates the index of QCE.
Port: Indicates the list of ports configured with the QCE.
Frame Type: Indicates the type of frame. Possible values are:
– Any: Match any frame type.
– Ethernet: Match EtherType frames.
– LLC: Match (LLC) frames.
– SNAP: Match (SNAP) frames.
– IPv4: Match IPv4 frames.
– IPv6: Match IPv6 frames.
Action: Indicates the classification action taken on ingress frame if parameters configured are matched with the frame’s content.
Possible actions are:
– CoS: Classify Class of Service.
– DPL: Classify Drop Precedence Level.
– DSCP: Classify DSCP value.
– PCP: Classify PCP value.
– DEI: Classify DEI value.
– Policy: Classify ACL Policy number.
