119
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 8: MULTICAST
LLQI (LMQI for IGMP): Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member
Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 in tenths of seconds; the default last
member query interval is 10 in tenths of seconds (1 second).
URI(sec): Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a host’s initial report of
membership in a group. The allowed range is 0 to 31744 seconds; the default unsolicited report interval is 1 second.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
8.2.3 STATUS
This section describes how to display the MLD Snooping Status and detail information. It will help you to find out detailed information
for MLD Snooping status.
WEB INTERFACE
To display the MLD Snooping Status in the web interface:
1. Click Multicast, MLD Snooping and Status.
2. To auto-refresh the information, select “Auto-refresh.”
3. Click “Refresh” to refresh an entry of the MLD Snooping Status Information.
FIGURE 8-9. MLD SNOOPING STATUS
PARAMETER DESCRIPTION
VLAN ID: The VLAN ID of the entry.
Querier Version: Working Querier Version currently.
Host Version: Working Host Version currently.
Querier Status: Show the Querier status is “ACTIVE” or “IDLE.”
“DISABLE” denotes the specific interface is administratively disabled.
