154
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 10: SECURITY
PARAMETER DESCRIPTION
Mode of IP Source Guard Configuration: Enable the Global IP Source Guard or disable the Global IP Source Guard. All configured
ACEs will be lost when the mode is enabled.
Port Mode Configuration: Specify IP Source Guard is enabled on which ports. Only when both Global Mode and Port Mode on a
given port are enabled, IP Source Guard is enabled on this given port.
Max Dynamic Clients: Specify the maximum number of dynamic clients that can be learned on given port. This value can be 0, 1, 2
or unlimited. If the port mode is enabled and the value of max dynamic client is equal to 0, the switch only allows the IP packets to
be forwarded that match static entries on the specific port.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Translate dynamic to static: Click to translate all dynamic entries to static entries.
10.3.2 STATIC TABLE
This section describes how to configure the Static IP Source Guard Table parameters of the switch. You can use the Static IP
Source Guard Table configure to manage the entries.
WEB INTERFACE
To configure a Static IP Source Guard Table Configuration in the web interface:
1. Click Security, IP Source Guard and Static Table.
2. Click “Add New Entry.”
3. Specify the Port, VLAN ID, IP Address, and MAC address in the entry.
4. Click Apply.
FIGURE 10-9. STATIC IP SOURCE GUARD TABLE
