29
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 2: SYSTEM
2.4.3 LLDP NEIGHBOR
This page provides a status overview for all LLDP neighbors. The displayed table contains a row for each port on which an LLDP
neighbor is detected. The columns hold the following information.
WEB INTERFACE
To show LLDP neighbors:
1. Click System, LLDP and LLDP Neighbor.
2. Click Refresh for manual update web screen.
3. Click Auto-refresh for auto-update web screen.
FIGURE 2-12. LLDP NEIGHBOR INFORMATION
NOTE: If there is no device that supports LLDP in your network then the table will show “No LLDP neighbor information found.”
Parameter description:
Local Port: The port on which the LLDP frame was received.
Chassis ID: The Chassis ID is the identification of the neighbor’s LLDP frames.
Port ID: The Remote Port ID is the identification of the neighbor port.
Port Description: Port Description is the port description advertised by the neighbor unit.
System Name: System Name is the name advertised by the neighbor unit.
System Capabilities: System Capabilities describes the neighbor unit’s capabilities. The possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is disabled, the capability is followed by (-).
System Description:
Displays the system description.
Management Address: Management Address is the neighbor unit’s address that is used for higher layer entities to assist discovery
by the network management. This could for instance hold the neighbor’s IP address.
