91
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: QUALITY OF SERVICE
FIGURE 5-14. QOS CONTROL LIST CONFIGURATION, SCREEN 2
Parameter description:
QCE: Indicates the index of QCE.
Port: Indicates the list of ports configured with the QCE.
DMAC: Indicates the destination MAC address. Possible values are:
– Any: Match any DMAC.
– Unicast: Match unicast DMAC.
– Multicast: Match multicast DMAC.
– Broadcast: Match broadcast DMAC.
– <MAC>: Match specific DMAC.
The default value is “Any.”
SMAC: Match specific source MAC address or “Any.” If a port is configured to match on DMAC/DIP, this field indicates the DMAC.
Tag Type: Indicates tag type. Possible values are:
– Any: Match tagged and untagged frames.
– Untagged: Match untagged frames.
– Tagged: Match tagged frames.
– C-Tagged: Match C-tagged frames.
– S-Tagged: Match S-tagged frames.
The default value is “Any.”
VID: Indicates (VLAN ID), either a specific VID or range of VIDs. VID can be in the range 1-4095 or “Any.”
PCP: Priority Code Point: Valid values of PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or “Any.”
DEI: Drop Eligible Indicator: Valid value of DEI are 0, 1 or “Any.”
Frame Type: Indicates the type of frame to look for incoming frames. Possible frame types are:
– Any: The QCE will match all frame type.
– Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
– LLC: Only (LLC) frames are allowed.
– SNAP: Only (SNAP) frames are allowed.
