55
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 4: VLAN MANAGEMENT
4.1 VLAN CONFIGURATION
You can assign a specific VLAN for management purpose. The management VLAN is used to establish an IP connection to the
switch from a workstation connected to a port in the VLAN. This connection supports a VSM, SNMP, and Telnet session. By default,
the active management VLAN is VLAN 1, but you can designate any VLAN as the management VLAN using the Management VLAN
window. Only one management VLAN can be active at a time.
When you specify a new management VLAN, your HTTP connection to the old management VLAN is lost. Make sure you have a
connection between your management station and a port in the new management VLAN or connect to the new management VLAN
through a multi-VLAN route.
WEB INTERFACE
To configure VLAN membership configuration in the web interface:
1. Click VLAN Management and VLAN Configuration.
2. Modify Global VLAN Configuration parameter.
3. Scroll the Mode, Port VLAN and Port Type to enable the Port VLAN Configuration parameter.
4. Click Apply to save the setting.
5. To cancel the setting, click the Reset button. It will revert to previously saved values.
FIGURE 4-1. VLAN CONFIGURATION
