Black Box LGB1152A User Manual Download Page 54

Page: 54 / 232

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 3: PORT MANAGEMENT

Parameter description:
UDLD port status

UDLD Admin State: The current port state of the logical port, Enabled if any of state (Normal,Aggressive) is Enabled.

– Device ID(local): The ID of Device.
– Device Name(local): Name of the Device.
– Bidirectional State: The current state of the port.

Neighbor Status

Port: The current port of the neighbor device.

Device ID: The current ID of the neighbor device.

Link Status: The current link status of the neighbor port.

Device Name: Name of the Neighbor Device.

Buttons

Auto-refresh

Refresh

off

Port 1

FIGURE 3-21. UDLD STATUS BUTTONS

Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

Refresh: Click to refresh the page immediately.

Port 1: Select the port that you want to display the DHCP Detailed Statistics.

Summary of Contents for LGB1152A








































































































































































































































Search results

Summary of Contents for LGB1152A

Reviews:

Related manuals for LGB1152A

Brands by name

Popular brands

Black Box LGB1152A, User Manual

Search results

Summary of Contents for LGB1152A

Reviews:

Related manuals for LGB1152A

Brands by name

Popular brands