67
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 4: VLAN MANAGEMENT
4.6 IP SUBNET-BASED VLAN
The IP subnet-based VLAN entries can be configured here. This page allows for adding, updating and deleting IP subnet-based
VLAN entries.
WEB INTERFACE
To configure IP subnet-based VLAN Membership in the web interface:
1. Click VLAN Management and IP Subnet-based VLAN.
2. Click “Add New Entry.”
3. Specify IP Address, Mask Length, VLAN ID.
4. Click Apply.
FIGURE 4-13. IP SUBNET-BASED VLAN MEMBERSHIP CONFIGURATION
Parameter description:
IP Address: Indicates the IP address.
Mask Length: Indicates the network mask length.
VLAN ID: Indicates the VLAN ID. VLAN ID can be changed for the existing entries.
Port Members: A row of check boxes for each port is displayed for each IP subnet to VLAN ID mapping entry. To include a port in a
mapping, simply check the box. To remove or exclude the port from the mapping, make sure the box is unchecked. By default, no
ports are members and all boxes are unchecked.
Buttons
Delete: To delete a IP subnet-based VLAN entry, check this box and press save. The entry will be deleted on the selected switch in
the stack.
Add New Entry: Click “Add New Entry” to add a new IP subnet-based VLAN entry. An empty row is added to the table, and the IP
subnet-based VLAN entry can be configured as needed. Any IP address/mask can be configured for the IP subnet-based VLAN
entry. Legal values for a VLAN ID are 1 through 4095.
