218
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 14: DIAGNOSTICS
PARAMETER DESCRIPTION
Monitor Destination Port: Port to output the mirrored traffic. Also known as the mirror port. Frames from ports that have either
source (rx) or destination (tx) mirroring enabled are mirrored on this port.
Mirror Source Port Configuration
Port: The logical port for the settings contained in the same row.
Mode: Select mirror mode.
Rx only: Frames received on this port are mirrored on the mirror port. Frames transmitted are not mirrored.
Tx only: Frames transmitted on this port are mirrored on the mirror port. Frames received are not mirrored.
Disabled : neither frames transmitted nor frames received are mirrored.
Enabled : Frames received and frames transmitted are mirrored on the mirror port.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
14.5 SFLOW
14.5.1 CONFIGURATION
The sFlow Collector configuration for the switch can be monitored and modified here. The configuration is divided into two parts:
Configuration of the sFlow receiver (a.k.a. sFlow collector) and configuration of per-port flow and counter samplers.
sFlow configuration is not saved to non-volatile memory, so a reboot or master change will disable sFlow sampling.
WEB INTERFACE
To configure the sFlow in the web interface:
1. Click Diagnostics, sFlow and Configuration.
2. Set the sFlow parameters.
3. Click apply to save the setting.
4. To cancel the setting, click the Reset button. It will revert to previously saved values.
