19
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 2: SYSTEM
Daylight Saving Time Configuration
Daylight Saving Time: This is used to set the clock forward or backward according to the configurations set below for a defined
Daylight Saving Time duration. Select “Disable” to disable the Daylight Saving Time configuration. Select “Recurring” and configure
the Daylight Saving Time duration to repeat the configuration every year. Select “Non-Recurring” and configure the Daylight Saving
Time duration for single time configuration. (Default: Disabled).
Recurring Configuration
Start time settings:
– Week - Select the starting week number.
– Day - Select the starting day.
– Month - Select the starting month.
– Hours - Select the starting hour.
– Minutes - Select the starting minute.
End time settings :
– Week - Select the ending week number.
– Day - Select the ending day.
– Month - Select the ending month.
– Hours - Select the ending hour.
– Minutes - Select the starting minute.
Offset settings:
– Offset - Enter the number of minutes to add during Daylight Saving Time. (Range: 1 to 1440)
NOTE: Below “Start Time Settings” and “End Time Settings” displays what you set on the “Start Time Settings” and “End Time
Settings” field information.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
FIGURE 2-7. CONFIGURE NTP SERVER BUTTON
Configure NTP Server: Click to configure NTP server when Clock Source is selected from NTP Server.
