129
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 8: MULTICAST
Profile Name & Index: The name of the designated profile to be associated. This field is not editable.
Entry Name: The name used in specifying the address range used for this rule. Only the existing profile address entries will be
chosen in the selected box. This field is not allowed to be selected as none (“-”) while the Rule Settings Table is committed.
Address Range: The corresponding address range of the selected profile entry. This field is not editable and will be adjusted
automatically according to the selected profile entry.
Action: Indicates the learning action upon receiving the Join/Report frame that has the group address matches the address range
of the rule.
Permit: Group address matches the range specified in the rule will be learned.
Deny: Group address matches the range specified in the rule will be dropped.
Log: Indicates the logging preference upon receiving the Join/Report frame that has the group address matches the address range
of the rule.
- Enable: Corresponding information of the group address that matches the range specified in the rule will be logged.
- Disable: Corresponding information of the group address that matches the range specified in the rule will not be logged.
Rule Management Buttons: You can manage rules and the corresponding precedence order by using the following buttons:
+: Insert a new rule before the current entry of rule.
X: Delete the current entry of rule.
arrow up: Moves the current entry of rule up in the list.
arrow down: Moves the current entry of rule down in the list.
Buttons
Add New Filtering Profile: Click to add new IPMC profile. Specify the name and configure the new entry. Click “Save.”
Delete: Check to delete the entry. The designated entry will be deleted during the next save.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Add Last Rule: Click to add a new rule in the end of the specific profile’s rule list. Specify the address entry and configure the new
entry. Click “Apply.”
8.4.2 FILTERING ADDRESS ENTRY
This page provides address range settings used in IPMC profile.
The address entry is used to specify the address range that will be associated with IPMC Profile. It is allowed to create up to 128
address entries in the system.
WEB INTERFACE
To configure the IPMC Profile Address Configuration in the web interface:
1. Click Multicast, Multicast Filtering Profile and Filtering Address Entry.
2. Click “Add New Address (Range) Entry.”
3. Specify Entry Name, Start Address and End Address.
4. Click apply to save the setting.
5. To cancel the setting, click the Reset button. It will revert to previously saved values.
6. Click “Refresh” to refresh an entry of the MLD Snooping Group Information.
