145
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 10: SECURITY
Buttons
Add New Entry: Click to add a new access management entry.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
10.2 802.1X
10.2.1 CONFIGURATION
This section describes how to configure the 802.1X parameters of the switch. 802.1X can be used to connect users to a variety
of resources including Internet access, conference calls, printing documents on shared printers, or by simply logging on to the
Internet.
WEB INTERFACE
To configure IEEE 802.1X in the web interface:
1. Click Security, 802.1X and Configuration.
2. Select “on” in the Mode of IEEE 802.1X Configuration.
3. Check Reauthentication Enabled.
4. Set Reauthentication Period (Default is 3600 seconds).
5. Set EAPOL Timeout (Default is 30 seconds).
6. Set Aging Period (Default is 300 seconds).
7. Set Hold Time (Default is 10 seconds).
8. Check RADIUS-Assigned QoS Enabled.
9. Check RADIUS-Assigned VLAN Enabled.
10. Check Guest VLAN Enabled.
11. Specify Guest VLAN ID.
12. Specify Max. Reauth. Count.
13. Check Allow Guest VLAN if EAPOL Seen.
14. Select Admin State and displays Port State.
15. Click Apply to save the setting.
16. To cancel the setting, click the Reset button. It will revert to previously saved values.
