10
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 1: OPERATION OF WEB-BASED MANAGEMENT
INITIAL CONFIGURATION
This chapter explains how to configure and manage the LGB1152A through the web user interface. With this facility, you can easily access
and monitor through any one port of the switch the status of the switch, including MIBs status, each port activity, Spanning tree status,
port aggregation status, multicast traffic, VLAN and priority status, even illegal access record and so on.
The default values of the LGB1152A are listed in the table below:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Username: admin
Password:
After the LGB1152A finishes configuration, you can browse it. For instance, type http://192.168.1.1 in the address row in a browser, it will
show the following screen and ask you to input the username and password to login and access authentication.
The default username is “admin” and password is empty. The first time you use the switch, enter the default username and password,
and then click the <Login> button. The login process now is completed. In this login menu, you have to input the complete username and
password respectively, the LGB1152A will not give you a shortcut to username automatically. This looks inconvenient, but is safer.
Two or more users using the administrator’s identity can manage this switch.
NOTE: When you log in to the Switch’s web page to manage the switch you must first type the Username of the admin. The Password is
blank, so after you type the Username, press enter.
When you log in to LGB1152A series switch Web UI management, you can use both ipv4 ipv6 login to manage the switch.
To optimize the display effect, we recommend that you use Microsoft IE 6.0 or above, Netscape V7.1 or above or Firefox V1.00 or above
and set the resolution to 1024 x 768. The switch supports a neutral web browser interface.
NOTE: The LGB1152A has dhcp enabled by default, so If you do not have a DHCP server to provide ip addresses to the switch, use the
Switch’s default ip address: 192.168.1.1
Password
Login
FIGURE 1-1. THE LOGIN PAGE
