78
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 5: QUALITY OF SERVICE
FIGURE 5-3. QOS INGRESS PORT POLICERS CONFIGURATION
Parameter description:
Port: The logical port for the settings contained in the same row. Click on the port number to configure the schedulers.
Enabled: Select the Port for which to enable the QoS Ingress Port Policers function.
Rate: To set the Rate limit value for this port, the default is 1000000.
Unit: Controls the unit of measure for the port policer rate as kbps, Mbps, fps or kfps.
Flow Control: If flow control is enabled and the port is in flow control mode, then pause frames are sent instead of discarding
frames.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
5.3 PORT SHAPERS
This section provides an overview of QoS Egress Port Shapers for all switch ports. The user can get detailed information for the
ports that belong to the currently selected stack unit, as reflected by the page header
WEB INTERFACE
To configure the QoS Port Shapers in the web interface:
1. Click Quality of Service and Port Shapers.
2. Click the Port and display the Qos Egress Port Shapers.
3. Scroll through the Port and Scheduler Mode and specify the Queue Shaper parameter.
4. Click Apply to save the setting.
5. To cancel the setting, click the Reset button. It will revert to previously saved values.
