175
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 11: ACCESS CONTROL
FIGURE 11-2. ACL RATE LIMITER CONFIGURATION
PARAMETER DESCRIPTION
Rate Limiter ID: The rate limiter ID for the settings contained in the same row and its range is 1 to 16.
Rate: The valid rate is 0, 10, 20, 30, ..., 5000000 in pps or 0, 25, 50, 75, ..., 10000000 in kbps.
Unit: Specify the rate unit. The allowed values are:
10 pps: packets per second.
25 kbps: Kbits per second.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
11.3 ACCESS CONTROL LIST
This page shows the Access Control List (ACL), which is made up of the ACEs defined on this switch. Each row describes the ACE
that is defined. The maximum number of ACEs is 512 on each switch.
Click on the lowest plus sign to add a new ACE to the list. The reserved ACEs are used for internal protocol and cannot be edited or
deleted, the order sequence cannot be changed and the priority is highest.
WEB INTERFACE
To configure Access Control List in the web interface:
1. Click Access Control and Access Control List.
2. Click the + button to add a new ACL, or use the other ACL modification buttons to specify the editing action (i.e., edit, delete, or
moving the relative position of entry in the list).
3. Specify the ACE parameter.
4. Click save to save the setting.
5. To cancel the setting, click the reset button. It will revert to previously saved values.
