Black Box LGB1152A User Manual Download Page 196

Page: 196 / 232

196

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHAPTER 12: SNMP

Jabb.: The number of frames with size larger than 64 octets received with invalid CRC.

Coll.: The best estimate of the total number of collisions on this Ethernet segment.

64 Bytes: The total number of packets (including bad packets) received that were 64 octets in length.

65–127: The total number of packets (including bad packets) received that were between 65 to 127 octets in length.

128–255: The total number of packets (including bad packets) received that were between 128 to 255 octets in length.

256–511: The total number of packets (including bad packets) received that were between 256 to 511 octets in length.

512–1023: The total number of packets (including bad packets) received that were between 512 to 1023 octets in length.

1024–1588: The total number of packets (including bad packets) received that were between 1024 to 1588 octets in length.

Search: You can search for the information that you want to see.

Show entries: You can choose how many items you want to show off.

Buttons

Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

Refresh: Click to refresh the page immediately.

Next: Updates the system log entries, turn to the next page.

Previous: Updates the system log entries, turn to the previous page.

12.4 HISTORY

12.4.1 CONFIGURATION

Configure RMON History table on this page. The entry index key is ID.

WEB INTERFACE

To configure the RMON History Configuration in the web interface:
1. Click SNMP, History and Configuration.
2. Click Add New Entry.
3. Specify the ID parameters.
4. Click Apply.

Summary of Contents for LGB1152A








































































































































































































































Search results

Summary of Contents for LGB1152A

Reviews:

Related manuals for LGB1152A

Brands by name

Popular brands

Black Box LGB1152A, User Manual

Search results

Summary of Contents for LGB1152A

Reviews:

Related manuals for LGB1152A

Brands by name

Popular brands