113
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 8: MULTICAST
PARAMETER DESCRIPTION
Statistic
VLAN ID: The VLAN ID of the entry.
Querier Version: Working Querier Version currently.
Host Version: Working Host Version currently.
Querier Status: Shows the Querier status is “ACTIVE” or “IDLE.” “DISABLE” denotes the specific interface is administratively disabled.
Queries Transmitted: The number of Transmitted Queries.
Queries Received: The number of Received Queries.
V1 Reports Received: The number of Received V1 Reports.
V2 Reports Received: The number of Received V2 Reports.
V3 Reports Received: The number of Received V3 Reports.
V2 Leaves Received: The number of Received V2 Leaves.
Router Port
Display which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device
or IGMP querier. Static denotes the specific port is configured to be a router port. Dynamic denotes the specific port is learnt to be a
router port. Both denote the specific port is configured or learnt to be a router port.
Port: Switch port number.
Status: Indicate whether a specific port is a router port or not.
Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Refresh: Click to refresh the page immediately.
Clear: Click to clear the page.
8.1.4 GROUP INFORMATION
After you set the IGMP Snooping function, then the switch can display the IGMP Snooping Group Information. Entries in the IGMP
Group Table are shown on this page. The IGMP Group Table is sorted first by VLAN ID, and then by group. This will use the last entry
of the currently displayed table as a basis for the next lookup. When the end is reached, the text “No more entries” is shown in the
displayed table. Use the button to start over.
WEB INTERFACE
To display the IGMP Snooping Group Information in the web interface:
1. Click Multicast, IGMP Snooping and Group Information.
2. Specify how many entries to show in one page.
3. To auto-refresh the information, select “Auto-refresh.”
4. Click “Refresh” to refresh an entry of the IGMP Snooping Groups Information.
5. Click First/Next Page to change the page.
