S12 Vet Monitor User’s Manual
6-6
6.4.1.3.
Adding Other Bed
Only add other bed monitor, the device can monitor alarm of other bed. If you have
added other bed monitor, you can up to a choice of 16 beds. Add other bed as follows:
1.
Select other bed observation interface area, in the pop-up window
【
Bed View
Settings (Bed number)
】
to select
【
Bed
】
submenu.
2.
Select the device number of the monitor to be observed in the list.
The setup interface mainly displays the device number, IP, and
patient information of the networked monitor.
Select
【
Show Offline Bed
】
to display the device numbers of all
monitors.
6.4.1.4.
Delete Bed
If you no longer need to monitor the remote monitor, you can remove it as follows:
1.
Select other bed observation interface area, in the pop-up window
【
Bed View
Settings (Bed number)
】
to select
【
Bed
】
submenu.
2.
Cancel the device number of the monitor
in the list. If you want to delete all
beds, you can
select
【
Delete All
】
.
6.4.1.5.
Display Main Bed
In the other bed monitoring area of its bed observation window, select a bed and
then other bed observation window will display the real-time monitoring interface of the
monitor. This selected bed is called the main bed.
6.4.1.6.
Alarm information Display
You can follow these steps to view the current real-time alarm information of the
main bed:
1.
Enter
【
Alarm
】
interface
by one of the following methods:
Click on the alarm information display area of the bed observation area, and
the alarm interface will pop up.
Select other bed observation interface area, in the pop-up window
【
Bed View
