S12 Vet Monitor User’s Manual
8-26
NOTE: QTc value is calculated based on QT-HR, not ECG-HR calculation
leads. You can enter QT View to view QT-HR. For details, please refer to
8.8.4 Entering QT View
.
The QT parameter area is displayed as follows. Depending on the settings, the display
of your monitor may be different.
(1)
QTc alarm limit (if QTc alarm is off, the alarm off icon is displayed here)
(2)
Parameter Unit
(3)
Parameter Label
(4)
QTc value
(5)
ΔQTc value (the difference between the current value of QT
C
and the baseline
value; if ΔQTc alarm is off, the alarm off icon is displayed on the right side of
the value)
(6)
QT value
8.8.4.
Entering QT View
QT View displays the current QT parameter values and waveforms, as well as
baseline/reference QT parameter values and waveforms. The steps to enter
【
QT View
】
are as follows:
1.
Select QT parameter area to enter
【
QT
】
menu.
2.
Select the
【
QT View
】
button at the bottom of the menu.
The following figure shows an example of QT View:
4
5
6
3
2
1
