S12 Vet Monitor User’s Manual
3-4
WARNING
：
If the monitor is damaged or does not work properly, do not use it for any
monitoring procedure on a patient. And then please contact the maintenance
personnel or the manufacturer immediately.
3.2.3.
Starting Monitoring
1.
Decide what parameters should be monitored or measured.
2.
Connecting required cables and sensors.
3.
Check whether the connection of cables and sensors is correct.
4.
Check whether all kinds of settings are correct, for example:
【
Patient Type
】
and
【
Paced
】
. For detailed information on the measurement or monitoring of each
parameter, please refer to the corresponding chapters.
3.3.
Shutting off the Monitor
Please follow the below steps to shut off the monitor:
1.
Confirm that the patient monitoring is finished.
2.
Disconnect the cables and sensors form the monitor.
3.
Confirm that the monitoring data is stored or cleared.
4.
Press the power switch for several second, the monitor interface will pop up the
shutdown dialog box, click OK to shutting off the monitor.
CAUTION
：
Although not recommended, you can press and hold the power on/off switch
for 5 seconds to forcibly shut down the monitor when it could not be shut down
normally or under some special situations. This may cause loss of data of the
monitor.
