S12 Vet Monitor User’s Manual
13-8
c)
The patient has acute right ventricular dysfunction (i.e., pulmonary heart
disease)
13.5.7.
Changing the pressure unit:
You can change the unit of pressure by following these steps:
1.
Select the IBP parameter area or waveform area to enter the corresponding
pressure menu.
2.
Select
【
Setup
】
submenu.
3.
Set IBP
【
Unit
】
if needed.
13.5.8.
Overlapping IBP Waveforms
Please following steps below, set up the IBP waveform overlay display:
1.
Enter the
【
Screen Layout
】
page, following method
：
Select
【
Screen Layout
】
quick key
→
select
【
Screen Layout
】
submenu.
Select
【
Main Menu
】
quick key
→
select
【
Screen Layout
】
from
the
【
Display
】
column.
2.
Select
【
IBP Overlap
】
in the waveform parameter area and select the IBP
waveform to be overlapped on the same line on the left side.
3.
Repeat the operation of step 2 at other locations with waveform parameter
areas if needed.
4.
Select to exit Setup page. The overlapped IBP waveform can be displayed
on the main interface.
You can open the
【
IBP Overlap
】
menu by selecting the IBP waveform area to be
overlapped on the main screen. In the
【
IBP Overlap
】
menu, you can make the
following settings:
Scale
