Biolight Meditech S12 Vet, Manual

Page: 35 / 294

S12 Vet Monitor User’s Manual
3-10
3.7. Operation Mode
3.7.1. Monitor Mode
Monitor mode is the most common clinical working mode used to monitor patient.
When the monitor is turned on, it automatically enters the monitor mode.
3.7.2. Standby Mode
You can temperately stops patient monitoring without switching off the monitor by
entering the standby mode. You can enter the Standby Mode in the following ways ：
3.7.2.1. Entering the Standby Mode
Select either way showed in the following to enter the Standby Mode
：
 Press 【 Standby 】 quick key, or
 Select 【 Main Menu 】 quick key→from the 【 Patient 】 column to select
【
Standby
】
button, or

Select 【 Patient Management 】 quick key→discharging patient and the
enter Standby Mode.
The monitor behaves as follows after entering the standby mode:
 Stops all parameter measurements.
 Disables all the alarms and prompt messages, except for the battery
low alarm.
 Turns screen brightness to the dimmest after entering the standby
mode for 30 seconds.
WARNING ：
 Pay attention to the potential risk of placing the monitor to standby. In the
standby mode, the monitor stops all parameters’ measurements and disables
all the alarm indications, except for the battery low alarm.