S12 Vet Monitor User’s Manual
15-4
6.
Check before use:
①
Before connecting the airway adapter to the breathing circuit, check if the
readings on the monitor are correct.
②
Before connecting the airway adapter to the patient circuit, verify the gas
reading and waveform through the display on the monitor.
③
After installing the mainstream CO2 sensor on the airway adapter, please check
the tightness of the patient circuit.
Status indicated by LED on Masimo IRMA CO
2
sensor:
LED
The indicated status
Steady green light
System OK
Blinking green light
Zeroing in progress
Steady red light
Oxygen battery error
Blinking red light
Check adapter
15.4.2.
Sidestream/Microflow CO2 module
1.
Attaching the CO
2
sensor cable
Plug the sensor cable into the CO
2
connector on the monitor, and the sensor should
be properly placed.
2.
Attaching the catheter, airway adapter or sampling tube
Connect the catheter, airway adapter or sampling tube to the sensor as required. Take
Nomoline ISA CO2 module as an example, as shown in the following figure:
To patient
Ventilator Wye
CO2
sensor
Airway adapter
