S12 Vet Monitor User’s Manual
3-3
3.2.
Getting Started
3.2.1.
Connecting the Power
Connecting the AC power
When the monitor need to be supplied by AC power, you can plug one end of the AC
power cord into the AC power connector on the back of the monitor and the other end
plug into the AC power outlet.
WARNING
：
Always use the accompanying power cord delivered with the monitor.
Use the battery if the integrity of the protective earth conductor or the
protective earthing system in the installation is in doubt.
Using battery
The monitor can be powered by a rechargeable lithium battery. After the battery is
installed, if the external power supply is suddenly interrupted, the monitor can
automatically use the lithium battery to supply the power. For the use of the battery,
please refer to
Chapter 21 Battery.
3.2.2.
Starting the Monitor
After installing the monitor, you can monitor the patient.
1.
Before powering on the monitor, please check whether there has mechanical
damaged, external cables and accessories connect correctly.
2.
Plug the power cord into an AC outlet. If using battery power, make sure there
is enough power in the battery.
3.
When
pressing the power switch, the alarm light will display red, yellow and
cyan in turn. After the alarm light is turned off, the screen will display the
startup interface. After the system emits a beep, the startup screen disappears
and enters the main monitoring interface.
