Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 48 / 152

48
Frame Operation and IP Network Setup
TCP/UDP Port Usage
From iControl to multiviewer
Between multiviewer and remote control panel
The following ports, used for communications to/from RCP-200 and Kaleido-RCP2 control
panels, are open by default on all Kaleido Software systems:
8085 TCP Internal communication
8086 TCP Internal communication
8087 TCP Used for debugging purposes
8090 TCP Web service
32769 TCP filenet-rpc
5120 UDP On multicast 230.8.8.9 for RCP2
7572 UDP On multicast 230.8.8.8 for “keep-alive” (heartbeat)
7571 UDP For “keep-alive” (heartbeat)
Port Used for Transport Notes
4160 Java Jini TCP Responsible for discovery and communications between
devices/services on a network.
32768–
65535 Java RMI TCP Remote Method Invocation (client/server
communication). Dynamic Allocation of ports. Required
for communication between client and Application
Server. This range can be restricted to match specific
security requirements. A minimum of 4000 ports should
be allocated.
Port Used for Transport Notes
5120 RCP2 TCP Used to listen for Kaleido Software discovery packets
10000 TCP For RCP2 protocol
10001 TCP For RCP2 protocol
5120 UDP On multicast 230.8.8.9 for RCP2 protocol
5121 UDP For RCP2 protocol
80 HTTP TCP Used by the RCP-200 to obtain information from the
multiviewer’s system database
13000 TCP Used by the RCP-200 to control the multiviewer via the
gateway
Port Used for Transport Notes