Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 40 / 152

40
Multiviewer Cabling
Changing the Output Resolution
5 Configure the network connectivity of all multiviewer devices (see Networking
Essentials , on page 44).
Changing the Output Resolution
To change a display’s resolution from the monitor wall
1 Connect a mouse to one of the USB connectors of the Kaleido-X16.
2 Right-click anywhere on the monitor wall, point to Monitor wall (if you clicked a
monitor), and then click Display resolution :
The Display Resolution window appears:
• If you would like the system to automatically select a resolution based on
information from the connected display, select Use detected monitor resolution .
• If you would like to manually set (and fix) the resolution, select the desired
resolution from the Default DVI resolution list:
3 Click OK .
The output resolution is adjusted accordingly.