Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 49 / 152

49
Kaleido-X16
Hardware Description & Installation Manual
From multiviewer to peripheral devices
From peripheral devices to multiviewer
The following ports must be open on peripheral devices (e.g., router controllers):
Router drivers also use default ports:
Port Used for Transport Notes
25 SMTP TCP Simple Mail Transfer Protocol, for e-mail alerts.
8851 AlVelte TCP Used to obtain information from Plura
(AlVelte) Studio Production Timer (SPT)
systems.
5100 GPI-1501 TCP Used to obtain information from GPI-1501 General
Purpose Interface I/O modules.
1
1.See also: From multiviewer to multiviewer , on page 47.
8910
2
2.Configurable.
TSL (network) TCP Used to obtain information from TSL devices that use
the TSL UMD version 5.0 protocol.
Port Used for Notes
2000 TCP Used to control the multiviewer’s internal router via the SAM (Snell/Pro-
Bel) SW-P-02 protocol
4381 TCP Used to control the multiviewer’s internal router via the Nevion
(Network) protocol
5194 TCP Used to control the multiviewer’s internal router via the NVEP Router
(NP0016) protocol.
14000 TCP Used to control the multiviewer’s internal router via the SAM (Snell/Pro-
Bel) SW-P-08 protocol
Driver Port Transport Notes
ETL 4000 TCP
GVG 7000 Native 12345 TCP
NVEP NV9000 (NP0017) 9193 TCP
VikinX Modular 4381 TCP
Quintech 9100 TCP
Sony HKSPC 12345 TCP GVGNP Emulator
Utah RCP-3 5001 TCP SC-4 Ethernet
SAM (Snell/Pro-Bel) SW-P-02 2000 TCP
SAM (Snell/Pro-Bel) SW-P-08 14000 TCP
Note:
This is configurable in XEdit—you can choose any UDP or TCP/IP port
to use for communications between the multiviewer and an external router.