Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 83 / 152

83
Kaleido-X16
Hardware Description & Installation Manual
10 Click Apply settings .
The Kaleido Multiviewer system must be restarted for changes to the network
configuration to take effect. A message appears prompting you to reboot the system
immediately.
11 Click OK .
If you have changed the multiviewer’s IP address, you will need to edit the XAdmin URL
in your Web browser's address bar in order to log on to the multiviewer again.
Note:
Settings cannot be applied to a multiviewer system while an
upgrade is in progress. If the multiviewer does not reboot after 10 seconds
or so, try clicking
Apply settings again after a minute or two, until the
multiviewer reboots.