Belden Grass Valley KALEIDO-X16, Installation & Service Manual

Page: 33 / 152

33
Kaleido-X16
Hardware Description & Installation Manual
Audio I/O TBA Pinout on the Kaleido-X16-S
The Audio I/O TBA pinout on the Kaleido-X16-S is as follows:
For more information about:
• SDTI audio specifications, see SDTI Audio Input , on page 144.
• analog audio specifications, see Analog Audio Output , on page 144.
• AES output specifications, see AES Outputs , on page 144.
• triggering audio monitoring, see “Triggering Audio Monitoring” in the Operation of the
Monitor Wall chapter of the Kaleido Software User’s Manual.
• calibrating audio monitoring delay, see “Calibrating the Audio Monitoring Delay” in the
Calibrating the Kaleido-X chapter of the Kaleido Software User’s Manual.
• calibrating audio monitoring color, see “Calibrating the Audio Monitoring Color” in the
Calibrating the Kaleido-X chapter of the Kaleido Software User’s Manual.
See Related Documentation , on page 15.
Control
The connectors located in the middle of the rear connector panel (the yellow and orange
color-coded area) are
Control connectors.
Linear Time Code (LTC)
The Kaleido-X16 supports two linear time code (LTC) inputs over BNC connectors. The
format is SMPTE ST 12 unbalanced (see
Time Code Inputs (LTC) , on page 145 for
specification details).
Bottom row Center row Top row
19 GND 10 AES 1 (+) 1 AES 1 (-)
20 GND 11 NC 2 NC
21 GND 12 GND 3 GND
22 GND 13 Analog Left Out 1 (+) 4 Analog Left Out 1 (-)
23 GND 14 Analog Right Out 1 (+) 5 Analog Right Out 1 (-)
24 GND 15 NC 6 NC
25 GND 16 NC 7 NC
26 GND 17 PC In 1 Left (not supported) 8 PC In 1 Right (not supported)
18 NC 9 NC
BNC connectors
for LTC inputs
USB connectors (2)
RJ-45 connectors
(2) for RS-422
serial connections
RJ-45 Ethernet
connector
DB-44 connector
for GPI I/O